Synthesis Of Materials Research Articles

Facile Synthesis and Electrochemical Analysis of Zn-Doped V2O5 Anode Materials for High-Rate Li Storage

The surging demand for Li rechargeable batteries with high energy densities and rapid rate capability has propelled research on materials that can replace the conventional anode materials like graphite. Vanadium pentoxides (V2O5) have emerged as promising anode candidates owing to their excellent rate capability. Specifically, V2O5 allows the electrochemical prelithiation process, in which three Li-ions can be inserted to form Li3V2O5, followed by reversible insertion and extraction of two Li-ions. Nevertheless, the unsatisfactory Li-ion diffusion coefficients and electrical conductivities of these materials remain major drawbacks. Here, we propose a Zn-doped V2O5 anode, fabricated using a two-step sol–gel method, for high-rate Li-ion batteries. Zn was incorporated into V2O5 to enhance the Li-ion transport kinetics through the electrode. The crystal structure (orthorhombic) of Zn-doped V2O5 was identified by X-ray diffraction analysis, and the Zn doping was confirmed by X-ray photoelectron microscopy. The effect of Zn doping was thoroughly examined using various analytical methods, such as cyclic voltammetry and galvanostatic intermittent titration technique. The Zn-doped V2O5 electrode exhibited remarkable cycling durability, enduring for 1000 cycles, while retaining an enhanced capacity, even under a high rate of 2C.

Synthesis and Properties of the LiMn2O4 Cathode Material for Lithium-ion Batteries

Spinel LiMn2O4 was synthesized by high-temperature solid-state method with lithium salt and manganese salt as raw materials, which were mixing with anhydrous ethanol as solvent under stirring, and calcining at high temperature in in the oxygen atmosphere. X-ray diffraction (XRD) and scanning electron microscope (SEM) showed that the size of lithium manganese particles with spinel structure was 80 to 200 nm, and the particle size distribution was uniform. The results showed that the prepared LiMn2O4 sample sintered at 700°C exhibited superior electrochemical performance when used as a cathode material for lithium-ion batteries with a voltage window of 2.5–4.8 V. The first charge-discharge specific capacity and first discharge capacity can reach 158.0 mAh‧g-1 and 138.4 mAh‧g-1, respectively, at 0.1 A‧g-1 current density, and the first Coulomb retention efficiency is 87.6%. The discharge specific capacity of the LiMn2O4 material can be maintained at 114 mAh‧g-1 when the test current density was returned to 0.1 A‧g-1 after 60 cycles.

The electronic structure and effective mass of pristine and Cl-doped CsPbBr3

Abstract Organic-inorganic lead halide perovskites (LHPs) have attracted great interest owing to their outstanding optoelectronic properties. Typically, the underlying electronic structure would determinate the physical properties of materials. But as for now, limited studies have been done to reveal the underlying electronic structure of this material system, comparing to the huge amount of investigations on the material synthesis. The effective mass of the valance band is one of the most important physical parameters which plays a dominant role in charge transport and photovoltaic phenomena. In pristine CsPbBr3, the Fröhlich polarons associated with the Pb-Br stretching modes are proposed to be responsible for the effective mass renormalization. In this regard, it would be very interesting to explore the electronic structure in doped LHPs. Here, we report high-resolution angle-resolved photoemission spectroscopy (ARPES) studies on both pristine and Cl-doped CsPbBr3. The experimental band dispersions are extracted from ARPES spectra along both and high symmetry directions. DFT calculations are performed and directly compared with the ARPES data. Our results have revealed the band structure of Cl-doped CsPbBr3 for the first-time, which have also unveiled the effective mass renormalization in the Cl-doped CsPbBr3 compound. Doping dependent measurements indicate that the chlorine doping could moderately tune the renormalization strength. These results will help understand the physical properties of LHPs as a function of doping.

Bimetallic Organic Frameworks via In Situ Solvothermal Sol-Gel-Crystal and Sol-Crystal Transformation as Durable Electrocatalysts for Oxygen Reduction Reaction.

The in situ solvothermal conversion of metal-organic gels (MOGs) to crystalline metal-organic frameworks (MOFs) represents a versatile and ingenious strategy that has been employed for the synthesis of MOF materials with specific morphologies, high yield, and improved functional properties. Herein, we have adopted an in situ solvothermal conversion of bimetallic MOGs to crystalline bimetallic MOFs with the aim of introducing a redox-active metal heterogeneity into the monometallic counterpart. The formation of bimetallic NiZn-MOF and CoZn-MOF via in situ solvothermal sol-gel-crystal and sol-crystal transformation is found to depend on the solvent systems used. The sol-to-gel-to-crystal transformation of NiZn-MOF via the formation of NiZn-MOG is found to occur through the gradual disruption of gel fibers leading to subsequent formation of microcrystals and single crystals of NiZn-MOF. These bimetallic MOFs and MOGs serve as promising electrocatalysts for oxygen reduction reaction (ORR) with an excellent methanol tolerance property, which can be attributed to the enhanced mass and charge transfer, higher oxygen vacancies, and bimetallic synergistic interactions among the heterometals. This work demonstrates a convenient strategy for producing bimetallic MOGs to MOFs through the introduction of a redox-active metal heterogeneity in the inorganic hybrid functional materials for fundamental and applied research. Our results connect MOGs and MOFs which have been regarded as having opposite physical states, that is, soft vs hard, and provide promising structural correlation between MOGs and MOFs at the molecular level.

Rapid conformational analysis of semi-flexible liquid crystals

ABSTRACT We present an approach for rapid conformational analysis of semi-flexible liquid crystals. We use a simple graphical user interface (GUI) tool that leverages rules-based methods for efficient generation of bend-angle distributions, offering a significant improvement over traditional single-conformer analysis. Our methods demonstrated proficiency in approximating molecular shapes comparable to those obtained from molecular dynamics (MD) simulations, albeit with notable deviations in the under sampling of hairpin conformations and oversampling of extended configurations. Re-evaluation of existing data revealed an apparent weak correlation between NTB transition temperatures and bend angles, underscoring the complexity of molecular shapes beyond mere geometry. Furthermore, we integrated this conformational analysis into a pipeline of algorithmic molecular design, utilising a fragment-based genetic algorithm to generate novel cyanobiphenyl-containing materials. This integration opens new avenues for the exploration of liquid crystalline materials, particularly in systems where systematic conformer searches are impractical, such as large oligomeric systems. Our findings highlight the potential and growing importance of computational approaches in accelerating the design and synthesis of next-generation liquid crystalline materials.

Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms.

Rechargeable metal-sulfur batteries are considered promising candidates for energy storage due to their high energy density along with high natural abundance and low cost of raw materials. However, they could not yet be practically implemented due to several key challenges: (i) poor conductivity of sulfur and the discharge product metal sulfide, causing sluggish redox kinetics, (ii) polysulfide shuttling, and (iii) parasitic side reactions between the electrolyte and the metal anode. To overcome these obstacles, numerous strategies have been explored, including modifications to the cathode, anode, electrolyte, and binder. In this review, the fundamental principles and challenges of metal-sulfur batteries are first discussed. Second, the latest research on metal-sulfur batteries is presented and discussed, covering their material design, synthesis methods, and electrochemical performances. Third, emerging advanced characterization techniques that reveal the working mechanisms of metal-sulfur batteries are highlighted. Finally, the possible future research directions for the practical applications of metal-sulfur batteries are discussed. This comprehensive review aims to provide experimental strategies and theoretical guidance for designing and understanding the intricacies of metal-sulfur batteries; thus, it can illuminate promising pathways for progressing high-energy-density metal-sulfur battery systems.

Utilizing Waste Cotton/Pigeon Pea Stalk Fibers Composites for Enhanced Sound Absorption and Insulation in Automotive Interiors

ABSTRACT This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced using a compression molding technique. According to ASTM standards, the acoustics, thermal conductivity, and physical characteristics of the composite samples were tested to assess their qualities. The impedance tube method detailed in ASTM E1050 was used to determine the sound absorption coefficients (SAC) for acoustics. The SAC values were measured at six frequencies such as 125, 250, 500, 1000, 2000, and 4000 Hz. The results showed that composite samples made from waste cotton and pigeon pea demonstrated sound absorption values of greater than 80%. Superior sound insulation and absorption, moisture absorption, fiber properties have also been demonstrated by waste composites. Especially, the waste cotton/pea stalk waste fiber composites achieved over 75% sound absorption, while the waste 28% composites performed well in terms of sound absorption, moisture absorption, and fiber properties. Even in humid conditions, the composite samples constructed from used cotton and pigeon pea stalks demonstrated good moisture resistance without reducing their insulating qualities. Soundproofing barriers are composite layers of foam or pigeon pea/cotton.

Synthesis and Characterization of a Photocatalytic Material from TiO2 Nanoparticles Supported on Zeolite Obtained from Ignimbrite Residue Used in Decolorization of Methyl Orange

In the present work, a TiO2/zeolite photocatalyst was synthesized by dispersing TiO2 nanoparticles obtained through the sol-gel method onto the surface of natural zeolite derived from ignimbrite residue. The zeolite was obtained from an ignimbrite rubble treatment collected from a quarry in Arequipa City, Peru. The research focused on the effect of zeolite on the TiO2 nanoparticles. The synthesized photocatalysts were characterized using various techniques, including field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray (EDS), X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), and Brunauer–Emmett–Teller surface area analysis (BET). The results revealed that the TiO2/zeolite samples displayed high crystallinity, with TiO2 being present in three phases and zeolite being present in the analcime phase. Furthermore, these samples exhibited a band gap of 3.14 eV and a high surface area compared to that of bare TiO2. Finally, the photocatalytic activity of the TiO2/zeolite composite obtained was evaluated toward the decomposition of 10 ppm and 20 ppm of methyl orange (MO) dye. The TiO2/zeolite samples demonstrated improved photocatalytic activity compared to that of pristine TiO2 under the same experimental conditions. This enhancement is primarily attributed to the increased specific surface area of the TiO2/zeolite samples, making them promising materials for future efficient and sustainable photocatalytic applications.

Single-atomic-Ni electrocatalyst derived from phthalocyanine-modified MOF for convoying CO2 intelligent utilization

Single-atomic-site catalysts have been demonstrated as promising candidates for electrochemical CO2 reduction reaction (eCO2RR). However, the universal construction strategies need to be further developed to synthesize the desired single-atomic-site catalysts with high eCO2RR activity for feasible CO2 utilization. Herein, a novel 2-methylimidazole-phthalocyanine-Ni (IM4NiPc) coordinatively modified ZIF-8 was rationally fabricated and applied to derive the single-atomic-Ni electrocatalyst (Ni-N-C-l), which is capable of delivering much improved activity for eCO2RR, compared to the pristine IM4NiPc immobilized onto ZIF-8-derived N-doped carbon surface, and is also comparable to the best reported catalysts. The satisfied Faradaic efficiency, current density and stability of CO2-to-CO electroconversion over Ni-N-C-l are shown to originate from the verified Ni-N4 configuration, particularly, reaching a CO Faradaic efficiency of 99% in a wide potential range. Moreover, based on the outstanding eCO2RR activity of Ni-N-C-l, we successfully realized the exemplary synthesis of amide polymer materials through CO-mediated electro/thermocatalytic cascade processes, demonstrating the feasibility of utilizing CO2 for material manufacturing. This finding is expected to provide useful insight on the precise design and rational synthesis of the novel single-atomic-site catalysts for future CO2 intelligent utilization.

Navigating phase diagram complexity to guide robotic inorganic materials synthesis

AbstractEfficient synthesis recipes are needed to streamline the manufacturing of complex materials and to accelerate the realization of theoretically predicted materials. Often, the solid-state synthesis of multicomponent oxides is impeded by undesired by-product phases, which can kinetically trap reactions in an incomplete non-equilibrium state. Here we report a thermodynamic strategy to navigate high-dimensional phase diagrams in search of precursors that circumvent low-energy, competing by-products, while maximizing the reaction energy to drive fast phase transformation kinetics. Using a robotic inorganic materials synthesis laboratory, we perform a large-scale experimental validation of our precursor selection principles. For a set of 35 target quaternary oxides, with chemistries representative of intercalation battery cathodes and solid-state electrolytes, our robot performs 224 reactions spanning 27 elements with 28 unique precursors, operated by 1 human experimentalist. Our predicted precursors frequently yield target materials with higher phase purity than traditional precursors. Robotic laboratories offer an exciting platform for data-driven experimental synthesis science, from which we can develop fundamental insights to guide both human and robotic chemists.

Zeolitic imidazolate framework-8: a versatile nanoplatform for tissue regeneration

Extensive research on zeolitic imidazolate framework (ZIF-8) and its derivatives has highlighted their unique properties in nanomedicine. ZIF-8 exhibits advantages such as pH-responsive dissolution, easy surface functionalization, and efficient drug loading, making it an ideal nanosystem for intelligent drug delivery and phototherapy. These characteristics have sparked significant interest in its potential applications in tissue regeneration, particularly in bone, skin, and nerve regeneration. This review provides a comprehensive assessment of ZIF-8’s feasibility in tissue engineering, encompassing material synthesis, performance testing, and the development of multifunctional nanosystems. Furthermore, the latest advancements in the field, as well as potential limitations and future prospects, are discussed. Overall, this review emphasizes the latest developments in ZIF-8 in tissue engineering and highlights the potential of its multifunctional nanoplatforms for effective complex tissue repair.

Perspectives on nitride ferroelectric semiconductors: Challenges and opportunities

The recent demonstration of ferroelectricity in nitride materials has enabled a broad spectrum of applications across electronics, optoelectronics, photovoltaics, photonics, ferroelectrics, acoustoelectronics, and quantum devices and systems. Ensuring that nitride ferroelectrics meet the rigorous demands of modern microelectronics and photonics necessitates addressing significant challenges, such as large coercive fields, low endurance, poor stability, high leakage current, and high optical loss. In this perspective, we review the latest advancements, highlight the distinctive properties and notable achievements of nitride ferroelectrics, and delve into their origins, material synthesis, operational mechanisms and devices. Moreover, we highlight the principal obstacles faced by nitride ferroelectrics in practical applications. Finally, we discuss potential solutions, future research directions, and the prospects for further advancements in this rapidly evolving domain.

Enhanced Electrochemical Performance in Supercapacitors through Cu-Cy Based Metal-Organic Framework Electrodes.

In the quest for advanced energy storage, the fusion of organic and metallic constituents has led to the development of a novel metal-organic polymer, synthesized from Cyamelurate and copper (Cu-Cy), for supercapacitor electrodes. This study presents the synthesis of Cu-Cy as a thin film on stainless steel grids and directly on nickel foam, followed by extensive characterization to confirm phase purity and investigate structural details. SCXRD and PXRD analyses affirmed the material's synthesis and crystalline purity, while FTIR provided chemical bond insights. TGA assessed thermal stability, revealing robustness suitable for electrochemical applications. Electrochemical testing via cyclic voltammetry showed that nickel foam-supported Cu-Cy electrodes, without binders, achieved a remarkable specific capacity of 1210.89 F/g at 5mV/s. In contrast, the stainless-steel grid electrodes, with binders and conductive agents, reached 363.73 F/g. Additionally, Cu-Cy demonstrated excellent cyclization resistance, maintaining 90% capacity after 11,000 cycles. These results highlight Cu-Cy potential as a superior electrode material for supercapacitors, especially in binder-free configurations, paving the way for its use in cutting-edge energy storage solutions.

Experimental and Theoretical Insights into Interfacial Properties of 2D Materials for Selective Water Transport Membranes: A Critical Review.

Interfacial properties, such as wettability and friction, play critical roles in nanofluidics and desalination. Understanding the interfacial properties of two-dimensional (2D) materials is crucial in these applications due to the close interaction between liquids and the solid surface. The most important interfacial properties of a solid surface include the water contact angle, which quantifies the extent of interactions between the surface and water, and the water slip length, which determines how much faster water can flow on the surface beyond the predictions of continuum fluid mechanics. This Review seeks to elucidate the mechanism that governs the interfacial properties of diverse 2D materials, including transition metal dichalcogenides (e.g., MoS2), graphene, and hexagonal boron nitride (hBN). Our work consolidates existing experimental and computational insights into 2D material synthesis and modeling and explores their interfacial properties for desalination. We investigated the capabilities of density functional theory and molecular dynamics simulations in analyzing the interfacial properties of 2D materials. Specifically, we highlight how MD simulations have revolutionized our understanding of these properties, paving the way for their effective application in desalination. This Review of the synthesis and interfacial properties of 2D materials unlocks opportunities for further advancement and optimization in desalination.

Mechanochemically Enabled Metastable Niobium Tungsten Oxides.

Metastable compounds have greatly expanded the synthesizable compositions of solid-state materials and have attracted enormous amounts of attention in recent years. Especially, mechanochemically enabled metastable materials synthesis has been very successful in realizing cation-disordered materials with highly simple crystal structures, such as rock salts. Application of the same strategy for other structural types, especially for non-close-packed structures, is peculiarly underexplored. Niobium tungsten oxides (NbWOs), a class of materials that have been under the spotlight because of their diverse structural varieties and promising electrochemical and thermoelectric properties, are ideally suited to fill such a knowledge gap. In this work, we develop a new series of metastable NbWOs and realize one with a fully cation-disordered structure. Furthermore, we find that metastable NbWOs transform to a cation-disordered cubic structure when applied as a Li-ion battery anode, highlighting an intriguing non-close-packed-close-packed conversion process, as evidenced in various physicochemical characterizations, in terms of diffraction, electronic, and vibrational structures. Finally, by comparing the cation-disordered NbWO with other trending cation-disordered oxides, we raise a few key structural features for cation disorder and suggest a few possible research opportunities for this field.

Innovative design of silicon-core mesoporous carbon composite for high performance anode material in advanced lithium-ion batteries

Silicon is widely recognized as an exceptionally auspicious anode material for lithium−ion batteries due to its remarkable specific capacity, suitable operational potential, and ecologically innocuous characteristics. This study presents a novel silicon@void@FC (fibrous carbon) composite anode material for lithium-ion batteries. Utilizing a one-step synthesis approach, the resulting hollow core–shell structure, combined with a mesoporous carbon shell, demonstrates exceptional electrochemical performance. The Si@Void@FC electrode exhibits remarkable cycle stability and rate performance, maintaining structural integrity over 500 cycles without observable degradation. The outer carbon shell acts as a protective layer and accommodates silicon volume expansion during cycling, preventing excessive contact with the electrolyte. The rich mesoporous structure facilitates efficient lithium-ion diffusion, enhancing lithiation and delithiation processes. The simplified one-step synthesis method further streamlines the preparation process, eliminating the need for complete silica template formation. This innovative Si@Void@FC composite material holds promise for advancing lithium-ion battery technology, addressing challenges associated with silicon-based anode materials, and offering insights into the design and synthesis of high-performance energy storage materials.

Perspectives Toward Damage-Tolerant Nanostructure Ceramics.

Advanced ceramic materials and devices call for better reliability and damage tolerance. In addition to their strong bonding nature, there are examples demonstrating superior mechanical properties of nanostructure ceramics, such as damage-tolerant ceramic aerogels that can withstand high deformation without cracking and local plasticity in dense nanocrystalline ceramics. The recent progresses shall be reviewed in this perspective article. Three topics including highly elastic nano-fibrous ceramic aerogels, load-bearing nanoceramics with improved mechanical properties, and implementing machine learning-assisted simulations toolbox in understanding the relationship among structure, deformation mechanisms, and microstructure-properties shall be discussed. It is hoped that the perspectives present here can help the discovery, synthesis, and processing of future structural ceramic materials that are insensitive to processing flaws and local damages in service.

Endowing Metal-Organic Coordination Materials with Chiroptical Activity by a Chiral Anion Strategy.

Recently, chiral metal-organic coordination materials have emerged as promising candidates for a wide range of applications in chiroptoelectronics, chiral catalysis, and information encryption, etc. Notably, the chiroptical effect of coordination chromophores makes them appealing for applications such as photodetectors, OLEDs, 3D displays, and bioimaging. The direct synthesis of chiral coordination materials using chiral organic ligands or complexes with metal-centered chirality is very often tedious and costly. In the case of ionic coordination materials, the combination of chiral anions with cationic, achiral coordination compounds through noncovalent interactions may endow molecular materials with desirable chiroptical properties. The use of such a simple chiral strategy has been proven effective in inducing promising circular dichroism and/or circularly polarized luminescence signals. This concept article mainly delves into the latest advances in exploring the efficacy of such a chiral anion strategy for transforming achiral coordination materials into chromophores with superb photo- or electro-chiroptical properties. In particular, ionic small-molecular metal complexes, metal clusters, coordination supramolecular assemblies, and metal-organic frameworks containing chiral anions are discussed. A perspective on the future opportunities on the preparation of chiroptical materials with the chiral anion strategy is also presented.

Wet-Chemical Synthesis of Elemental 2D Materials.

Wet-chemical synthesis refers to the bottom-up chemical synthesis in solution, which is among the most popular synthetic approaches towards functional two-dimensional (2D) materials. It offers several advantages, including cost-effectiveness, high yields,, precious control over the production process. As an emerging family of 2D materials, elemental 2D materials (Xenes) have shown great potential in various applications such as electronics, catalysts, biochemistry,, sensing technologies due to their exceptional/exotic properties such as large surface area, tunable band gap,, high carrier mobility. In this review, we provide a comprehensive overview of the current state-of-the-art in wet-chemical synthesis of Xenes including tellurene, bismuthene, antimonene, phosphorene,, arsenene. The current solvent compositions, process parameters utilized in wet-chemical synthesis, their effects on the thickness, stability of the resulting Xenes are also presented. Key factors considered involves ligands, precursors, surfactants, reaction time, temperature. Finally, we highlight recent advances, existing challenges in the current application of wet-chemical synthesis for Xenes production, provide perspectives on future improvement.

Solvothermal Guided V2O5 Microspherical Nanoparticles Constructing High-Performance Aqueous Zinc-Ion Batteries.

Rechargeable aqueous zinc-ion batteries have attracted a lot of attention owing to their cost effectiveness and plentiful resources, but less research has been conducted on the aspect of high volumetric energy density, which is crucial to the space available for the batteries in practical applications. In this work, highly crystalline V2O5 microspheres were self-assembled from one-dimensional V2O5 nanorod structures by a template-free solvothermal method, which were used as cathode materials for zinc-ion batteries with high performance, enabling fast ion transport, outstanding cycle stability and excellent rate capability, as well as a significant increase in tap density. Specifically, the V2O5 microspheres achieve a reversible specific capacity of 414.7 mAh g-1 at 0.1 A g-1, and show a long-term cycling stability retaining 76.5% after 3000 cycles at 2 A g-1. This work provides an efficient route for the synthesis of three-dimensional materials with stable structures, excellent electrochemical performance and high tap density.